Posts about: TracePro (16)
Defective Object Warning Message
Question I have created a large elliptical reflector with focal length 1 = 100,000 mm, focal length 2 = 10,000 mm, and z position = 55,000 mm. The reflector has approximately 200 surfaces. When I perform a ray-trace, the Audit gives a Defective Object warning message, but the ray-trace appears to...
11. Radiometry and Photometry
Grid Raytrace - calculation of actual Beam Width
Question I have set up a Grid Raytrace with a rectangular grid boundary, with half-height x and y set = 10. I also selected a Rectangular Grid Pattern with 10 x-points and 10 y-points. I expected to get a 20x20 beam, but the Irradiance Map shows the beam to be 18x18. What is wrong? Synopsis Grid...
TracePro Solar Utility - Introduction
Surface and Material Properties - guidelines for when to use one or both
Synopsis Surface and Material Properties - guidelines for when to use one or both Solution "The answer to whether or not you need both a Material and a Surface Property is ""sometimes"". There are some effects that occur at an interface that is best modeled as a Surface Property:
3. Applications
Fluorescence FluorescenceExampleBegin.omlb FluorescenceExampleProperties.txt FluorescenceExampleComplete.omlb TexturedRepTile Backlight TextureTest1.txt Backlight_TextureTest1.oml (option - use this file and skip to Page 16 of the tutorial) Tissue Optics TissueOptics.oml